To get maximum performance of the engine, you need to know how to check engine oil like an expert. When checking the engine oil, it is crucial to understand whether check oil hot or cold. We shall guide you on how to and when to check motor oil.
Check Oil Hot or Cold
Checking the level of your motor oil prevents you from inconveniences when driving. It is advisable that you check the oil regularly helps you to discover any problems your car may develop. Replacing it at the right time will increase the performance and efficiency of your engine.
Various factors will determine whether to check oil hot or cold for Toyota. Some of the factors you need to consider when checking are the temperature in your area and the type of oil. However, if you do the process correctly, either hot or cold, you should get the correct reading.
Some people will tell you to check your engine oil when warm, while others recommend it when cold. It does not matter whether hot or cold, but it’s crucial to check what your owner’s car manual says.
1. Type of Oil
Different types of oils react differently when you check their oils in both hot and cold temperatures. Regular oils tend to have a normal contraction and expansion. It is, therefore, most likely that irrespective of the temperature, you will get almost the same readings.
The contraction and expansion rates of synthetic oils are much higher when the temperature changes. During the cold season, they will contract, and they overexpand with high temperatures.
2. Type of Vehicle
Most modern cars have electronic-level controllers. It measures the motor oil when warm and when it is in a leveled place. In these models, this is much more advisable to check the oil when hot. The check is usually electronic, and thus it does not allow checking the oil manually. It is crucial to note that when you check the oil when hot, be careful not to get burnt by the engine.
3. External Temperature
Another thing that can affect the reading of your oil check is the temperature on the outside. Irrespective of the type of oil you are using, it is not advisable to check vehicle oil when the weather is cold. When the temperatures are too low, consider starting the engine to leave it to run for a while. You can then check the motor oil when it warms up.
What to Use When Checking Oil
To check the oil of your vehicle, you use a dipstick. Before using the dipstick, make sure that it is dry. You can get it out and wipe it with a clean cloth before dipping it back. The dipstick has some markings on it. It shows you the highest and the lowest level. Your oil should not exceed the maximum marking; neither should it go below the minimum marking on the dipstick. Your oil level should be somewhere in the middle of the two marks on the dipstick.
How to Check Engine Oil
Checking engine oil is not a difficult task and it will also not take you too much time. These are the steps on how you check the oil in your vehicle. For more understanding, you can also watch.
Step 1: Park Your Vehicle
Start by parking your car on a leveled surface. This will help you to get the correct reading. If the engine was in use for a long time, wait for it to cool down for around 10 to 15 minutes. It will also give the oil a chance to settle down. Most manufacturers these days have recalibrated the dipstick to give a correct reading irrespective of whether the oil is oil or cold.
Step 2: Pop the Hood
Always remember that checking oil should be done when the engine is off. After that, open the hood of the vehicle and locate where the dipstick is. It is mainly located around the engine. In most cases, it has an orange or red plastic tab on it.
Step 3: Remove and Wipe the Dipstick
After locating the dipstick, remove it. It will most probably have some oil reading, but it is not accurate. So, wipe the oil off the dipstick with a clean cloth. Always make sure that the dipstick you use to check the oil is dry for accuracy.
Step 4: Insert the dipstick
When the dipstick is dry, insert it into the oil and pull it back. It will give you a reading. By looking at it, you will see the level of the oil. Wipe the dipstick again and re-insert for confirmation.
The first reading may not be accurate since the vehicle oil can wink or splash upward on the dipstick. Re-check the oil level on both sides of the dipstick. The indicators on the dipstick will help you know whether the level is low, high, or good.
Step 5: Check the Color and Consistency
Before you finish the process, inspect the consistency and color of the oil visually. This will help you to know if the oil needs to be changed. In case the oil on the stick is milky, gritty, thick, or black, then that is an indicator that it needs to be changed.
Step 6: Put the dipstick back
After you are comfortable with the level, color, and consistency of the motor oil, wipe the dipstick with a cloth and put it back in the tube completely. Ensure that the stick is well inserted and close the hood.
In case the oil is off-colored or the level is low, then it is advisable to do something as soon as possible. You can refill the oil if it is low or change it if off-colored. If you do not know how to go about it, visit your garage or consult an oil expert.
Frequently Asked Questions (FAQs)
Q. What Temperature Should You Check Your Oil At?
There is no specific temperature set at which you should check the motor oil. You can check it, if hot or cold, and it will give you almost the same reading. However, if you live in a very cold area, it is crucial to warm up the oil first before you check. You do this by leaving the engine to run for some minutes. You can also check the car owner’s manual to see what they advise you to do.
Q. How Long Does a Car Have to Sit Before You Check the Oil?
Like we have said, you can check the oil when it is warm or cold, and you will get almost the same reading. However, if you had been on a long journey or if the engine has been running for a long, then you need to let the vehicle sit before you begin checking the motor oil. This is because the oil could be unstable, and it could give the wrong reading. It is advisable to leave the vehicle cool for 10 to 15 mutes in a flat place. After this, the oil will be stable and will give an accurate reading.
Q. Do You Check Toyota Oil Hot or Cold?
On whether to check oil hot or cold for Honda, you can do it either way. The temperature of the oil will not make so much difference. If you leave in a cold environment, let the vehicle run for some time before checking the oil. This will make the oil a little warm for accurate readings. If you are an amateur, don’t check the oil hot to prevent yourself from burning.
Q. What Happens If Oil Level Is Too High?
Overfilling oil can cause damage to the engine. When the level of oil is too high, it may cause foaming, which is dangerous for the engine. As the crankshaft spins, it may whip the oil, causing it to froth. The froth may cause the engine to wear drastically. The maximum and minimum marks on the dipstick guide you on where the oil level should be. It should not go beyond the maximum marking nor below the minimum marking. The correct level of oil should be between the two markings.